如何Make A Kitchen Utensil Holder From A Repurposed Cutting Board - beplay体育网站下载,beplay苹果版app

BySimona Ganea| Published onMar 17, 2021

不确定你的下一个DIY项目应该是什么？少数东西，厨房或用餐区的一点配件？这个小型器皿架很容易放在一起，不需要太多的材料或工具。它也可以根据很多和许多不同的方式定制，这是一个整体有趣的项目。

如何Make A Kitchen Utensil Holder From A Repurposed Cutting Board

Materials you’ll need to build a kitchen utensil holder:

切菜板
patterned fabric
别针
silk ribbon
灰色丙烯酸漆
画笔
锤子
剪刀
hot glue

How to build the kitchen utensil holder:

第1步：确保您拥有所需的一切

Since this project requires a few materials that you might not normally use for other crafts, take some time to make sure you have everything. The hammer is important and any small one would do. The fabric also plays an important role in this project so pick a type that you really like.

Step 2: Paint the cutting board

First things first: paint the cutting board white. This will give you a nice and clean surface to work with later on. The white acrylic paint is easy to work with and very versatile. You might have some left over from previous projects.

Make sure to paint the front, back and all the edges. You don’t want to miss any spots and a thin paintbrush is probably best because it gives you more dexterity.

第3步：测量和切割织物

The idea here is to use the fabric to make a little pocket that you can then attach onto the front of the cutting board. It doesn’t need to be very big so measure it and figure out how much you need to cut from each side.

Fold the edge a bit and place it onto the cutting board so you can see how well it fits and whether the fabric piece is small enough.Don’t make it too small either. Leave a bit of extra fabric on the sides so you can fold it and give a bit of flexibility for the pocket.

Step 4: Glue the seams

This is a no-sew project so instead of using a needle and thread or a sewing machine you can just use the hot glue gun instead. Apply thin lines of glue to the underside of the fabric along the edges and fold them one and then once more to make the seams.

Start with one of the longer edges, then do the same thing for the other one. You only need a thin line of glue for each side.

为织物的底部边缘做同样的事情。顶部可以像它一样留下。

第5步：用图钉将织物固定到板上

Take your fabric, align it to one of the edges of the cutting board making sure to fold it inwards. Then start adding the thumbtacks. You’ll need a hammer to push them into the wood through the fabric. Start from one of the corners and make sure your fabric doesn’t move as you continue to add more thumbtacks all along the edge.

Step 6: Continue with the other side and the bottom

当您完成第一侧时，再次折叠面料并重复该过程。尝试均匀地将图钉空闲并在每侧使用相同的数字。

当双方都完成时，所有剩下的都是底部。在那里添加一些更多的图钉，并确保不会在它们之间留下大差距。

Step 7: Make a little bow

拿两件丝带并制作一点弓。功能区的颜色应该与您使用的织物和白色切割板基座一起亮相。

Cut the ends of the ribbon at a slight angle when making the bow. With the first piece make two loops that cross each other and meet in the middle, like an infinity symbol. With the other piece tie a knot around the middle of the two loops and cut off the excess.

Put a little dab of glue on the fabric and place the little bow on top. Press it gently so it adheres to the fabric.

Step 8: Add a hanging loop at the top

Your cutting board should have a little hole at the top so it can be hanged. Run a piece of ribbon through that hole, make a loop and tie it with a knot. Cut off the excess ribbon. Now you can properly hang your new kitchen utensil holder and it will look lovely.

Use the same type of ribbon for the little bow and this loop to keep the design simple. You don’t want these little details to draw too much attention or to clash with the fabric so pick a neutral color like beige or ivory.