DIY墙架:墙壁或窗户上的华丽丙烯酸架子
您是否曾经想过自己,“如果我可以在窗户上悬挂一两个架子,那就太好了。所有的自然光!”或者:“我一生中需要更多的丙烯酸。架子?我可以做丙烯酸架吗?”这是一些好消息:您可以DIYwall shelves,用丙烯酸制成,然后将它们挂在墙壁或窗户上。在任何一种情况下,如此优雅,现代的外观。在本教程中,我们将向您展示如何制作它们并将其挂在窗口中,尽管您可以轻松地切换支架方向以进行简单的墙壁安装。
Materials Needed:
- 3/4” acrylic sheeting, cut to size
- 右角支架(每个架子四个)
- Screws
- 金喷漆
- Level, drill, and various sizes of drill bits
To begin, you need to mark on the acrylic protection paper where you will drill the holes for your brackets. For wall installation, attach the brackets in conjunction with the placement of studs in your wall frame. For window installation, attach two brackets on each end of your shelf.
Mark these clearly and accurately. Acrylic is less forgiving than wood when it comes to drilling, so you want to be sure to hit the right spot with your drill bit the first time.
When you’re done marking all the holes you’ll need with your brackets, set them carefully in a well-ventilated area on top of a drop cloth. Lightly coat the brackets with gold spray paint.
Place the screws (be sure they are shorter than丙烯酸的厚度) on a paper plate, and lightly spray them as well. This will ensure that the screw heads are the same color as the brackets when you go to install them.
You will need to use three sizes of drill bits to create the correct size of hole for your bracket screws. Start pretty small, then choose the drill bit that matches the screw exactly, then choose one drill bit in between them.
从一个小钻头开始,精确地通过孔标记的中心垂直钻孔。另外,请使用稳定的手,不要让钻头“捕获和拉”丙烯酸。如果开始抓住钻头,请始终准备将钻头向后拉出。
注意不要在丙烯酸架子上一直钻孔,否则安装后的架子顶部将有孔。还请记住,原始的钻头将比实际螺钉尺寸小得多以连接支架。
在钻头上向上移动两到三个尺寸,然后钻入相同的孔,使直径稍微稍微苦。如果您试图用蓝色制成一个大孔,则丙烯酸很容易破裂;但是,当您逐步生长孔时,它将形成精美。
Tip: To ensure that you don’t go all the way through the acrylic, measure the tip of your drill bit to be just shorter than the thickness of your acrylic, and place a piece of tape on the drill bit so the edge of the tape marks the maximum depth you can drill.
The acrylic and drill bit can get pretty hot when you drill. Be sure to remove the drill bit frequently during drilling, and get the acrylic shavings off the drill bit so it maximizes the drilling effectiveness. Repeat for the largest drill bit.
在这一点上,您应该通过DIY墙架的底面钻入所有孔,它们应该是支架螺钉的确切尺寸。
The top side of your shelves will look untouched (hopefully?).
将孔钻入您的丙烯酸中,是时候取下丙烯酸架子底面(钻孔)侧的保护盖了。
用金螺钉连接支架(完全干燥时)。
如您所见,喷涂螺钉的螺纹在金色的上没有太大变化。但这与支架旁边的头部颜色有所不同。
将支架连接到您的DIY墙架上,是时候将其安装到墙壁上(或窗户)了。将它们放置在所需的位置,然后确保水平。
Once they are level, mount your acrylic shelves with 2-1/2” wood screws (gold head preferred; paint them if you need).
At this point, you can remove the protective covering on the top of your acrylic shelves.
Aren’t they gorgeous?
这是窗户中的丙烯酸架子的一瞥。当然,它们看起来也很棒。因为很清楚。
窗户上有丙烯酸架子的好处之一是自然光和植物生命的机会。
窗户中的丙烯酸架子清晰透明,可视觉上轻巧的外观以时尚,现代的方式。
保持架子装饰最小,让架子发光。当您订购定制的丙烯酸架子时,您可以选择抛光的侧面边缘。但是,这是非常昂贵的,因此,如果您选择抛光边缘,请准备好将丙烯酸成本加倍或三倍。
这个例子没有抛光丙烯酸架子的边缘,因此它们略微不透明。当然,抛光看起来很可爱,但是我们也对这种外观感到非常满意。
When the bottom of your DIY wall shelves looks as beautiful as the front and top, you know you’ve stumbled upon a good thing.
我们希望您通过将丙烯酸板作为独特的架子材料,在DIY墙面上喜欢这种现代风格。开心!