DIY A Farmhouse Table - Modernizing the Traditional - beplay体育网站下载,beplay苹果版app

ByEmily Burmeister| Published onFeb 3, 2015

of 48

DIY-farmhouse-table-finished

DIY-farmhouse-table-top

farmhouse-table-materials

farmhouse-table-creating-the-top

farmhouse-table-how-to-build

farmhouse-table-how-to-build-wood-planks

farmhouse-angled-tabletop-meassure

farmhouse-angled-tabletop-tutorial

farmhouse-angled-tabletop-glue

farmhouse-angled-tabletop-tutorial-press

glue-top-of-farmhouse-table-pushing-down

farmhouse-table-how-to-build-legs

farmhouse-table-how-to-build-base

farmhouse-table-how-to-build-base1

farmhouse-table-how-to-build-base2

farmhouse-table-how-to-build-base3

farmhouse-table-how-to-build-base4

farmhouse-table-how-to-build-base-pipes

farmhouse-table-how-to-build-base-drilling

glue-top-of-farmhouse-table

glue-top-of-farmhouse-table-nailing

glue-top-of-farmhouse-table-finished

how-to-stain-farmhouse-table-with-classic-gray

how-to-stain-farmhouse-table-with-classic-gray1

wood-stain-farmhouse-table-step

wood-stain-farmhouse-table-base-step

wood-stain-farmhouse-table-legs

wood-stain-farmhouse-table-top

clear-laquer-top-coat

clear-laquer-top-coat2

securing-farmhouse-table-top-connect

adding-pipes-to-farmhouse-table

adding-pipes-to-farmhouse-table-2

securing-farmhouse-table-top-3

securing-farmhouse-table-top-meassure

farmhouse-table-detail-legs

DIY-farmhouse-table-for-dining-room

gray-farmhouse-table-finished

farmhouse-with-galvanized-pipe-closer-look

farmhouse-table-legs-details

farmhouse-tabletop-detail

farmhouse-table-legs-detail

farmhouse-table-corner-detail

farmhouse-detail-x-leg

farmhouse-angled-top-do-it

DIY-farmhouse-table-decor

DIY-farmhouse-table-how-to-legs

how-to-build-a-farmhouse-table

DIY A Farmhouse Table - Modernizing the Traditional

Buy Now

farmhouse-table-how-to-build-wood-planks

farmhouse-angled-tabletop-tutorial-press

glue-top-of-farmhouse-table-pushing-down

farmhouse-table-how-to-build-base-drilling

how-to-stain-farmhouse-table-with-classic-gray

how-to-stain-farmhouse-table-with-classic-gray1

farmhouse-with-galvanized-pipe-closer-look

I am really excited to share this with everyone today. I built a farmhouse table. I’d been wanting to get a new dining room table but felt overwhelmed with the idea of building one. So, I decided to just go and do it. I wanted to create one that was the perfect size for my space, fit my style, and my budget. If you’d like to learnhow to build this DIY farmhouse table, follow along!

Materials Needed:

x4 planks
x2 2×4
x3 3×3
x2 1x.5
x1 piece of plywood
stain
sanding blocks

Step One: Prep and Measure

I began with deciding on plans of the size for our new farmhouse table. I measured out the space and landed on a happy place of it being. The size of my table is 4 feet wide, 5 feet long and 32 inches high. My old dining room table was 30 inches, I wanted to make this one slightly taller but still keeping it in the realm of a standard table height.

Step Two: Plan the Pattern

I began this project by creating the table top and going with a great angled idea. I wanted to make mine be different from other farmhouse tables, get a little creative. So, I decided to split the table top down the middle and then have the wood planks angle out from there. To create the table top I cut the plywood down to my desired size.

Step Three: Cut and Add Planks

Then it was time to add the wood planks. I chose a 1 inch thick pine wood plank for the top. With varying details and knots to add character. To fit them I cut a 45 degree angle at one side. Set the board on the plywood. Already having marked the plywood halfway down the center. I set the planks along the center.

Step Four: Cut the Planks

Leave the longer side over the edge, showing the excess board amount. Then draw a line where the end of the plywood is on the wood planks. Cut on that line. I was able to repeat this step to cut all of the wood planks for the table top.

Step Five: Attach Planks to Plywood

When all were cut, I brought it into the house. Made sure the cuts were even, set snug against each other. Using wood glue, laying it on in rows on the plywood surface.

Step Six: Put Weight On It

Pushing down on the planks to get it in the correct spot. Then flipping my coffee table and anything heavy to weigh it down. I let the table top sit with the weights on over night to make sure the wood glue set. In the morning none of the planks moved after that.

Step Seven: Start the Legs

While the glue was setting I began the steps needed to create the legs. Before I got started I purchased agalvanized pipethat is 3 ft long, 1 inch in diameter and spray painted it black. This pipe will go in between the two legs. Now it was time to make the legs.

Using the 4×4 as the leg base, cutting it 3 ft long. This allows it to be 1 foot shorter then the width of the table. I wanted it to be sturdy enough to hold the table. But not poking out the sides and making it difficult for people to sit.

Next use another 4×4 as the center post attaching the top to the base. The height of this was 25 inches long. Allowing the height of the base 4×4 and the table top thickness to equal 32 inches total. My desired height for the table. Screw the two 4×4’s together creating a T shape.

Taking a 2×4 cutting it 48 inches long. This will be the piece running under the table top itself. So having it be shorter then the width of the table was necessary. Screw this 2×4 to the T shaped 4×4, making it a oddly shaped H.

Step Eight: Angle the Legs

Then it is time to add the angled detail on the legs. Using a 2×4 and cutting a 45 degree angle. Cutting them to be 18 inches long. This will bring the 2×4’s angled from the center post to the base and the tabletop. Creating a X.

Step Nine: Attach

Screw them into the odd shaped H and I now have farmhouse legs.

Step Ten: Drill Hole

To add the detail I wanted with the galvanized pipes. I drilled a hole slightly larger then 1 inch in the center of the X in the legs.

Drilling slowly with a drill bit tip. Just enough space to have the pipe slide through the hole to the other side.

Step Eleven: Framing

The tabletop is glued on and I need to make the edges pretty by adding a frame on it. Using 1 inch wide by 1/2 inch thick pine long boards. Cutting them the length of the table and then 45 degree cutting them. This allows the corner to be flush, and sitting directly together. Creating a clean corner appearance.

Nailing them into place around the wood planks.

Step Twelve: Sanding

After this I needed to do a lot of sanding. There is a few uneven wood planks that need to be smooths out. I want the surface to be as flat as possible so that food and plates can sit on it without tipping over. Taking a electric sander and just running it along until the surface felt smooth.

Step Thirteen: Staining

Once the sanding was done I took it in to stain it. Using Milwax classic gray color. Taking my gloved hand and dipping the rag into the wood stain can. Wiping the rag at the angle of the table top, going with the wood grain.

I spread it out evenly, being sure to use long strokes to keep the brush marks off of the wood.

Staining the legs was needing to be more thorough. There is lots of corners, crevices, and grooves that the stain needed to get in. Being careful to not let any drips happen. If they did wipe quickly over them and the drips should blend in.

我喜欢轻的表,所以我在ly did one coat for the top. But did two for the legs.

Step Fourteen: Sealing

Checking to see if it was dry. Once I could feel it and had nothing come off or any sticky feeling to the stain I knew it was dry. With this being a table it needs to be sealed with a clear lacquer. This will seal in the stain, help protect the wood from moisture and heat. Putting it on with a paintbrush and simply painting it on.

Doing wide strokes again to help blend in any brush lines. It was not necessary to brush this along the wood grain. And it is needed to get the clear coat over the cracks as well. Do not avoid them. I did two coats. I would recommend to at least do two for any table top.

Step Fifteen: Assemble

With all of this stained and ready to go it was time to connect the top to the legs and call this a farmhouse table. To do this I cut small squares from 2×4’s to set on either side of the boards on the underside of the table top.

Using the galvanized pipe and pushing it into the hole.

Then screwing the end cap on once the pipe is pushed through. This allows the two table legs to be connected.

Step Sixteen: Double Check

Then checking measurements on all sides to confirm the legs are evenly in the middle before I begin securing them. Then cutting a piece the length of the two sides to set on top. Screwing them into place. I also turned the table upside down again and stained tis portion with stain once it was connected.

我选择这样做,而不只是性交勒gs to the top because I wanted to make sure that the screws would not come through to the surface and break the top wood planks. With the table only being 1 inch thick the screws would most likely come through. There is also a added benefit of making this table movable. This gives a easy place to disassemble the table if I have to move it out of the room.

After this was done, my farmhouse table was done. I had 4 farmhouse chairs from my previous table that works well with it, along with a bench. I can comfortably sit 2 adults on all sides of this table. And can squish 3 on the sides if needed. It is a big table without feeling too big.

深灰色的污点和角度的木板s it gives a contemporary feel to a standard farmhouse table. Adding the galvanized pipes and the X shaped legs also brings even more detail to the table.

I enjoy a rustic look, but always have to make it feel modern to me and my home. This table blends the two together wonderfully. I also only spent $78 from start to finish for everything down to the screws for the table. I don’t even want to think how much I would have spent had I purchased this table new from a store.

There are so many wonderful details about this table. I wanted to be sure to not do too much. And worried that with the angled top, the X legs, and the pipe it would be too much. I think with the dark gray stain it all works together.

So if you are like me and wanting to create your own table. Do it! There was a lot of steps to take, but none of them were too complicated. Once breaking it down I realized that my fear of it was unnecessary. It was a fun project that I would gladly do again. I hope you give it a try!