如何建造一个窗户盒播种机 - Easy初学DIY - beplay体育网站下载,beplay苹果版app

ByBrittney Smart| Published on4月5日，2021年4月

Do you love the look of flowers blooming out of window planter boxes? I do. This is why we decided to add some to our home this year, to add a bit of color at the above-ground level.

This is a pretty straightforward DIY project, great for beginner or advanced builders. (With my boards cut, each box took me about 20 minutes to build, start to finish.) So even if you’ve never built anything before, I think you can do this one! Of course, you could just start off by building one of these boxes or go for a whole collection of them. Once completed, you’ll love adding flowers of various colors to create stunning displays in your newwindow box planter.

窗台上的花盆箱Homebeplay平台没信用beplay苹果版appdit DIY材料

建造窗户舱植物所需的材料：

3 – 1×8 cedar boards, cut to the desired length (for example, the width of your window)
2 - 1×6雪松板，切成7-1 / 16英寸（真正的宽度为1×8板）
2” exteriordecking screws

逐步说明，以创建自己的DIY窗口播种机盒以使您的家中亮起beplay平台没信用

Step 1: Attach Corners of the Front Board to the Bottom Board

Attach corners of the front board to the bottom board. Cedar planks come with one side smoother than the other. Out of your three window-width-cut boards, choose the one you want on the front of your box and hold it upright. Lay another board, smooth-side-down, next to this one to form an “L” shape. Check for alignment on both ends. At the bottom of your box-front board (and, thus, through the side of the bottom board), predrill about 2” in from the board end. Put in a screw. Do the same on the other end.

第2步：保护前端和底板附件

Secure front and bottom board attachment with more screws. Flip the L-shaped boards over (to form a tent) and continue screwing the two boards together. Place a screw about every 6”-8” apart.

Tip: Cedar is very prone to splitting, so you can predrill these if you’d like. (My boards were wet from the morning’s rain, so I did not predrill during this step.)

步骤3:附加the Back Plank

Attach back plank. Repeat these steps to attach the back plank to your bottom board. Because the interior face of the back plank is the one that will be seen in your window box (the top few inches, anyway), make sure the smooth side is facing the inside of the box. In other words, the smooth faces of both your front and back boards should face the same direction. Predrill and insert your two corner screws of your back plank, then complete the attachment with additional screws.

提示：雪松板可以略微扭曲;在拧紧到位的时候，请检查铅垂并固定在适当位置。

Would you believe you’re almost done? Because you are. Nice work.

第4步：将侧面放置在窗口播种机上

Position the sides. Position a 1×6 side piece where you want it in your box. This example shows the sides inset about ½”.

Step 5: Attach the Sides to the Bottom of the Box

Attach side piece to bottom of the box. Holding the side piece in place, predrill then screw through the bottom plank into the side piece. If your cedar is a bit warped, this will help to pull things more squarely into place before you attach the sides.

Step 6: Finish Securing the Sides

完全安全的边。泼渣，然后拧入孔中以将侧件连接到前后板。提示：预防或最小化在靠近木板末端的工作时，几乎总是需要进行预防或最小化。

第7步：将整理触摸添加到窗口盒播种机上

Step back and give yourself a high five. Of course, you can stain, paint, and/or seal the boxes at this point. Although cedar is a great exterior wood in and of itself, it will grey more quickly without protection. To hang the boxes, screw two L brackets into your house’s framing studs under the window, checking for level often, and then screw the bottom of the box to the bottom of the L brackets.

现在有趣的开始添加你的花朵到窗户盆栽播种机。一旦你制作了所需的种植者，就可以让你的花朵准备创造美丽的花卉展示，以照亮你的家。beplay平台没信用如果你有孩子，这是让他们参与乐趣的好时机，你甚至可以为每个孩子指定一个种植者来创建自己独特的展示。Window box planterscan be changed each season, and it’s an easy way to keep up with the colors for different times of the year.

我希望你喜欢建造自己的窗口盒！